Differences

This shows you the differences between two versions of the page.

--- extend [2018/07/23 11:13] – extend vertical - try swapping stations brucemutton
+++ extend [2018/08/08 02:19] – [Extended elevation scrap drawing considerations] add -flip none brucemutton
@@ Line 84: / Line 84: @@
 ====Extended elevation scrap drawing considerations====
-If you have drawn a scrap with the opposite orientation to the extended centreline generation, it will tend to plot inside out.  You need to compensate for this by including ''-flip horizontal'' in the definition of your scrap.  Or you can add ''-revise scrap-id -flip horizontal'' in your Extend-CaveName-ElevEXT.th file.
+If you have drawn a scrap with the opposite orientation to the extended centreline generation, it will tend to plot inside out.  You need to compensate for this by including ''-flip horizontal'' in the definition of your scrap.  Or you can add ''-revise scrap-id -flip horizontal'' or ''-flip none'' in your Extend-CaveName-ElevEXT.th file.
 If you include in your scrap drawing a ''point station -name <station>'' where that <station> is at a survey leg junction AND is offset in the extended centreline due to extended loop misclosure, then it will force the extended station to plot, incorrectly, in its original location, distorting the scrap in the vicinity of that leg.  This can be vexing, as \\