Differences

This shows you the differences between two versions of the page.

--- tips [2019/10/05 22:28] – XTherion - Finding drawing where extents are large brucemutton
+++ tips [2019/10/05 22:49] – XTherion - Finding objects brucemutton
@@ Line 45: / Line 45: @@
   * Always check the "object setup area" on right side and "status line" on bottom of it. You may find there any necessary information with help to create object with correct parameters and in correct place.
   * If you press the "Escape" key you leave the "Insert Mode" and switch to "Select mode". The "Select mode" works in two steps - **select** - after first click you may check the parameters of object in "Status line" or "File commands" or "object setup area" and - **move** - after second click you may move with object.
-  * If you add line object, you may start to insert new line simple by pressing of Ctrl+L keys, you don't need to escape from "Inserting mode" first.
+  * To add a line object, you may start to insert new line simple by pressing of Ctrl+L keys, you don't need to escape from "Inserting mode" first.
   * Always check the small yellow tick on first point of line object. It shows the FREE space side of line. It means you should draw walls in counterclockwise direction, the blocks in clockwise direction, pit or chimney in counterclockwise direction, etc. If you made a mistake there is "reverse" option in "Line commands" section.
@@ Line 52: / Line 52: @@
 An easier way to locate any drawing objects is to open the Objects window on the top right-hand side of the XTherion interface, and click on one of the objects listed.
 Except for scraps, and areas, most objects will be selected and the drawing area will be panned to show the object mid-screen.\\
+For example, clicking on object 4 below, selects it and brigs it to the centre of the drawing area.
+{{tips:xtherion_extents_find__objects.png?300}}
+If you are repeatedly creating th2 files with large blank extents around the drawings and images, then it may be because of spurious drawing lines made accidentally when navigating during data collection with PocketTopo, TopoDroid, SexyTopo or the likes.  It may also be because of inappropriate parameters used (chosen by you or the application developer) to export data from these applications to Therion.\\
+If drawings and export\imports are well posed, then your drawing area extents should not be much larger than your actual drawing.\\
+You can manually or automatically tweak the drawing area that is viewable for a particular file if you scroll down to the Drawing Area window near the bottom of the right-hand side of XTherion, and make adjustments there.
-If you are repeatedly creating th2 files with large blank extents around the drawings and images, then it may be because of spurious drawing lines made accidentally when navigating during data collection with PocketTopo, TopoDroid, SexyTopo or the likes.  It may also be because of inappropriate parameters used to export data from these applications to Therion.
 ====Checking and erasing empty objects in .th2 files====